|
1 3/4" (44.5mm) x 1/2" (12.7mm) Angled Strike Plate - Brass
|
|
Pushbutton Lock
|
|
|
|
|
|
|
1-3/4-in plate comes with a 3/16-in flange and is used for applications where there is no bore hole.
|
Used to secure cabinet doors and drawers. The perfect combination when you need both security and convenience.
|
|
|
|
National 8052 Disc Tumbler Cylinder Cam Lock for 15/64" Material
|
|
National 8053 Disc Tumbler Cylinder Cam Lock for 7/8" Material
|
|
|
|
|
|
|
Disc tumbler cylinder cam lock for drawers, right or left hand doors with lipped/overlay construction (straight cam) or flush construction (formed cam). For overlay application, the combined thickness of front and frame cannot exceed the cylinder length. 90º cam turn on all locks. Key removable in both locked and unlocked positions. All locks feature FlexaCam™. Three spacers included offer three thicknesses (3/16", 1/8" and 1/16"), providing up to 12 different dimensional variations. Will key together with all other disc tumbler locks using D8785 key blank. Supplied with two keys, trim washer, spur washer (for wood), two stop washers, mounting nut and two cams.
|
Disc tumbler cylinder cam lock for drawers, right or left hand doors with lipped/overlay construction (straight cam) or flush construction (formed cam). For overlay application, the combined thickness of front and frame cannot exceed the cylinder length. 90º cam turn on all locks. Key removable in both locked and unlocked positions. All locks feature FlexaCam™. Three spacers included offer three thicknesses (3/16", 1/8" and 1/16"), providing up to 12 different dimensional variations. Will key together with all other disc tumbler locks using D8785 key blank. Supplied with two keys, trim washer, spur washer (for wood), two stop washers, mounting nut and two cams.
|
|
|
|
National 8055 Disc Tumbler Cylinder Cam Lock for 1-1/8" Material
|
|
National 8060 Disc Tumbler Cylinder Cam Lock for 1-7/16" Material
|
|
|
|
|
|
|
Disc tumbler cylinder cam lock for drawers, right or left hand doors with lipped/overlay construction (straight cam) or flush construction (formed cam). For overlay application, the combined thickness of front and frame cannot exceed the cylinder length. 90º cam turn on all locks. Key removable in both locked and unlocked positions. All locks feature FlexaCam™. Three spacers included offer three thicknesses (3/16", 1/8" and 1/16"), providing up to 12 different dimensional variations. Will key together with all other disc tumbler locks using D8785 key blank. Supplied with two keys, trim washer, spur washer (for wood), two stop washers, mounting nut and two cams.
|
Disc tumbler cylinder cam lock for drawers, right or left hand doors with lipped/overlay construction (straight cam) or flush construction (formed cam). For overlay application, the combined thickness of front and frame cannot exceed the cylinder length. 90º cam turn on all locks. Key removable in both locked and unlocked positions. All locks feature FlexaCam™. Three spacers included offer three thicknesses (3/16", 1/8" and 1/16"), providing up to 12 different dimensional variations. Will key together with all other disc tumbler locks using D8785 key blank. Supplied with two keys, trim washer, spur washer (for wood), two stop washers, mounting nut and two cams
|
|
|
|
National 8109 Pin Tumbler Cylinder Cam Lock for 1-1/2"
|
|
Straight Cam for Disc Tumbler
|
|
|
|
|
|
|
For drawer, right handed or left hand doors for lipped or overlay construction. For overlay application, the combined thickness of front and frame cannot exceed the cylinder length. Through the use of a shifter, the 360° key turn turns the cam 90° in either direction. Actual application determines which cam position is the locked position. Each lock is furnished with an alternate cam for opposite cam turn. Key removable in both locked and unlocked positions. Supplied with two keys, trim washer, spur washer (for wood), mounting nut and two cams.
|
Selection of cams that permit adaption of disc tumbler cylinder cam locks to meet nearly every application need.
|
|
|
|
Double Formed Cam for Disc Tumbler
|
|
National 8051 Disc Tumbler 7/16" Cylinder Cam Lock for 7/64" Material
|
|
|
|
|
|
|
Selection of cams that permit adaption of disc tumbler cylinder cam locks to meet nearly every application need. Double formed cams can be reversed when required.
|
For drawers LH or RH doors with lipped/overlay construction (straight cam) or flush construction (formed cam).
|
|
|
|
National 8053 Disc Tumbler 1-3/16" Cylinder Cam Lock for 7/8" Material
|
|
National 8055 Disc Tumbler 1-7/16 " Cylinder Cam Lock for 1-1/8" Material
|
|
|
|
|
|
|
For drawers LH or RH doors with lipped/overlay construction (straight cam) or flush construction (formed cam).
|
For drawers LH or RH doors with lipped/overlay construction (straight cam) or flush construction (formed cam).
|
|
|
|
National 8060 Disc Tumbler 1-3/4" Cylinder Cam Lock for 1-7/16" Material
|
|
National 8703 Disc Tumbler 15/16" Cylinder Drawer Lock
|
|
|
|
|
|
|
For drawers LH or RH with lipped/overlay construction (straight cam) or flush construction (formed cam).
|
For drawers and doors. Surface mounted. Requires 7/8" diameter hole for cylinder.
|
|
|
|
National 8704 Disc Tumbler 15/16" Cylinder Door Lock
|
|
National 8090 Disc Tumbler 15/16" Cylinder Gang Lock
|
|
|
|
|
|
|
For drawers and doors. Surface mounted. Requires 7/8" diameter hole for cylinder.
|
For locking drawer in desk pedestals and other multiple drawer applications. Requires 7/8" diameter hole for cylinder and dado for bar, measuring 7/8" x 1/8" deep on inside of panel.
|
|
|
|
National 8043 Disc Tumbler Sliding Door Locks
|
|
Single Formed Cam for Disc Tumbler 1-1/8"
|
|
|
|
|
|
|
For wood sliding doors. Pushing in cylinder locks doors. Key removable in both locked and unlocked positions.
|
Selection of cams that permit adaption of disc tumbler cylinder cam locks to meet nearly every application need.
|
|
|
|
Straight Hook Cam for Disc Tumbler 1-1/2"
|
|
Flat Strike 7/8” X 17/64” Bolt Hole - Nickel
|
|
|
|
|
|
|
Selection of cams that permit adaption of disc tumbler cylinder cam locks to meet nearly every application need. Straight hook cams can be reversed when required.
|
Flat strike with square ends, 7/8” X 17/64” bolt hole.
|
|
|
|
Flat Mounting Plate for Cylinder Cam Locks 2-3/16" x 1-1/4"
|
|
National Master Key E41A
|
|
|
|
|
|
|
Mounting plate for cam locks. Screw mounted, use No. 8 screws (not included).
|
Disc tumbler E41A master key. Use with MKKA (Master Keyed Keyed Alike) 8053 and 8060 disc tumbler cylinder cam locks. Material: Brass.
|
|
|
|
Timberline Lock Plug - Polished Nickel
|
|
Cam Lock Body (3/32" Setback/ 1 1/4" Cam ) - 90°/ Horizontal
|
|
|
|
|
|
|
Lock plugs for all lock types. All Timberline locks consist of two separate components: a Lock Plug, and a Cylinder Cam Lock Body (each sold separately). Any Timberline Lock Plug snaps into any Timberline Cylinder Cam Lock Body.
|
Cams locks must be installed so that they lock in the counter-clockwise position. Rotates 90°. Requires 16.5 mm diameter hole. Mount 3/4" material.
|
|
|
|
Cam Lock Body (15/32" Setback/ 13/16" Cam ) - 90°/ Horizontal
|
|
Cam Lock Body (7/8" Setback/ 1 1/4" Cam ) - 90°/ Horizontal
|
|
|
|
|
|
|
Cams locks must be installed so that they lock in the counter-clockwise position. Rotates 90°. Requires 16.5 mm diameter hole. Mount 3/4" material.
|
Cams locks must be installed so that they lock in the counter-clockwise position. Rotates 90°. Requires 16.5 mm diameter hole. Mount 3/4" material.
|
|
|
|
Cam Lock Body (9/32" Setback/ 1 1/4" Cam ) - 90°/ Vertical
|
|
Cam Lock Body (Gang Lock) - Front Mount
|
|
|
|
|
|
|
Cams locks must be installed so that they lock in the counter-clockwise position. Rotates 90°. Requires 16.5 mm diameter hole. Mount 3/4" material.
|
Full 1/2" throw. Fits within 1/2" drawer slide clearance. Minimal machining required: hole for lock and groove for lockbar.
|
|
|
|
Cam Lock Body (Gang Lock) - Side Mount
|
|
Cam Lock Body (Thick Panel) - 7/8" - 1-3/8"
|
|
|
|
|
|
|
Full 1/2" throw. Fits within 1/2" drawer slide clearance. Minimal machining required: hole for lock and groove for lockbar.
|
Mounting flange adjusts to allow locks to be installed in door from 7/8" - 1 3/8" thick. Rotates 90°. Requires 16.5mm diameter hole.
|
|
|
|
Deadbolt Lock Body (3/32" Setback/ 1 3/8" Cam) - Horizontal
|
|
Double Door Lock Body (3/32" Setback/ 1 13/32" Cam)
|
|
|
|
|
|
|
Attractive nylon housing. All have 1/2" throw. Requires 16.5mm diameter hole. Mounts 3/4" material.
|
Attractive nylon housing. All have 1/2" throw. Requires 16.5mm diameter hole. Mounts 3/4" material.
|
|
|
