|
7/8" Recovery Bead Stile & Rail Bit (1/2" Shank) - Carbide Tip
|
|
1-5/8" Vertical Raised Panel Bit (1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
Use to produce glass doors that look equally good from the front and back.
|
Use to produce full sized raised panels by feeding 3/4" stock vertically.
|
|
|
|
5/8" 2+2 Raised Panel Bit ( 1/2" Shank) - Carbide Tip
|
|
1/2" 2+2 Raised Panel Bit (1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and molding.
|
Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and molding.
|
|
|
|
Flush Laminate Trim Bit (1/4" Shank) - 3/8" - Solid Carbide
|
|
Double Flute Straight Bit 3/8" H x 1/8" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Solid micrograin carbide extends the cutting life and the self-piloting feature eliminates the expense and upkeep of a ball bearing assembly. Cuts all plastic laminates. Use on portable routers and laminate trimmers for trimming plastic laminate.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Freud Diablo 7 1/4" x 24 ATB x 5/8" Framing Saw Blade (Bulk 2 Pack)
|
|
Single Flute Straight Bit 1" H x 1/4" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Diablo’s next generation 7-1/4” 24T Framing Blade with new Tracking Point™ Tooth design delivers maximum life and durability with effortless cutting performance.
|
This single flute Freud bit was designed for high production work with maximum chip clearance for fast feed rates. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 1/2" H x 3/16" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 1" H x 9/32" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 7/8" H x 3/8" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 1" H x 5/16" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 7/8" H x 1/4" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 5/8" H x 1/4" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 1" H x 1/4" Dia (1/4" Shank) - Carbide Tip
|
|
1" Two Flute Flush Trimming Bit (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
|
|
|
1/2" Two Flute Flush Trimming Bit (1/4" Shank) - Carbide Tip
|
|
1" Two Flute Flush Trimming Bit (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
|
|
|
Double Flute Straight Bit 1" H x 1/2" Dia (1/4" Shank) - Carbide Tip
|
|
1/2" Two Flute Flush Trimming Bit (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
|
|
|
Double Flute Straight Bit 1-1/4" H x 3/8" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 1" H x 7/16" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 3/4" H x 1/2" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 3/4" H x 9/16" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 3/4" H x 11/16" Dia (1/4" Shank) - Carbide Tip
|
|
1 1/4" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
1" Two Flute Flush Trimming Bit (1/2" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 7/8" H x 1/2" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
1" Two Flute Flush Trimming Bit (3/8" Shank) - Carbide Tip
|
|
3/4" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 1-1/4" H x 1/2" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 3/4" H x 15/32" Dia for Undersized Plywood (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
1 1/4" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
1 1/2" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
1/2" Mortising Bit (1/4" Shank) - Carbide Tip
|
|
Down Spiral Bit (1/4" Shank) - 3/4" - Solid Carbide
|
|
|
|
|
|
|
Freud’s Mortising Bits are designed with deep center gullets for maximum material removal without chip loading. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud’s solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
1 1/2" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
1 1/2" Two Flute Flush Trimming Bit (1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
|
|
|
1" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
3/4" Mortising Bit (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud’s Mortising Bits are designed with deep center gullets for maximum material removal without chip loading. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
