|
7/8" Recovery Bead Stile & Rail Bit (1/2" Shank) - Carbide Tip
|
|
1-5/8" Vertical Raised Panel Bit (1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
Use to produce glass doors that look equally good from the front and back.
|
Use to produce full sized raised panels by feeding 3/4" stock vertically.
|
|
|
|
5/8" 2+2 Raised Panel Bit ( 1/2" Shank) - Carbide Tip
|
|
1/2" 2+2 Raised Panel Bit (1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and molding.
|
Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and molding.
|
|
|
|
1" Raised Panel & Backcutter (1/2" Shank) - Carbide Tip
|
|
2 Piece Adjustable Rail & Stile Cutter Sets
|
|
|
|
|
|
|
Use to produce panels from 3/4" stock that are flush with the doorframe for a professional, architecturally correct appearance.
|
Produces perfect fitting rail and stile doors from 5/8" to 1-1/4" stock.
|
|
|
|
Three Wing Slotting Cutters - Carbide Tip
|
|
Four Wing Slotting Cutters - Carbide Tip
|
|
|
|
|
|
|
Superior to straight router bits for slotting the edges of board. Carbide tips cut spline joints in solid wood, plywood, and particle board. Producing slots and grooves for T-moldings, spline joints, tongue & groove joints and many other applications.
|
Superior to straight router bits for slotting the edges of board. Carbide tips cut spline joints in solid wood, plywood, and particle board. Producing slots and grooves for T-moldings, spline joints, tongue & groove joints and many other applications.
|
|
|
|
Slotting Cutter Sets - Carbide Tip
|
|
Euro Replacement Bearing 1/2"
|
|
|
|
|
|
|
Includes three wing slotting cutter, arbor and ball bearing. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
|
Replacement bearing for # BITETH (Laminate Trimmer with Euro Square Bearing Router Bit).
|
|
|
|
Euro Replacement Bearing 3/4"
|
|
Flush Laminate Trim Bit (1/4" Shank) - 3/8" - Solid Carbide
|
|
|
|
|
|
|
Replacement bearing for # BITETT (Laminate Trimmer with Euro Square Bearing Router Bit).
|
Solid micrograin carbide extends the cutting life and the self-piloting feature eliminates the expense and upkeep of a ball bearing assembly. Cuts all plastic laminates. Use on portable routers and laminate trimmers for trimming plastic laminate.
|
|
|
|
Double Flute Straight Bit 3/8" H x 1/8" Dia (1/4" Shank) - Carbide Tip
|
|
Single Flute Straight Bit 1" H x 1/4" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
This single flute Freud bit was designed for high production work with maximum chip clearance for fast feed rates. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 1/2" H x 3/16" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 1" H x 9/32" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 7/8" H x 3/8" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 1" H x 5/16" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 7/8" H x 1/4" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 5/8" H x 1/4" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 1" H x 1/4" Dia (1/4" Shank) - Carbide Tip
|
|
1" Two Flute Flush Trimming Bit (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
|
|
|
1/2" Two Flute Flush Trimming Bit (1/4" Shank) - Carbide Tip
|
|
1" Two Flute Flush Trimming Bit (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
|
|
|
Double Flute Straight Bit 1" H x 1/2" Dia (1/4" Shank) - Carbide Tip
|
|
1/2" Two Flute Flush Trimming Bit (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
|
|
|
Double Flute Straight Bit 1-1/4" H x 3/8" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 1" H x 7/16" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 3/4" H x 1/2" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 3/4" H x 9/16" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 3/4" H x 11/16" Dia (1/4" Shank) - Carbide Tip
|
|
1 1/4" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
1" Two Flute Flush Trimming Bit (1/2" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 7/8" H x 1/2" Dia (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
1" Two Flute Flush Trimming Bit (3/8" Shank) - Carbide Tip
|
|
3/4" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
Double Flute Straight Bit 1-1/4" H x 1/2" Dia (1/4" Shank) - Carbide Tip
|
|
Double Flute Straight Bit 3/4" H x 15/32" Dia for Undersized Plywood (1/4" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
|
1 1/4" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
1 1/2" Straight Bit (2 Flute • 1/2" Shank) - Carbide Tip
|
|
|
|
|
|
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging.Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
|
|
|
